MAQcenter
TAKAMAZ
XS-700

XS-700
TAKAMAZ

CNC 1 SPINDLE 2 TURRET PRECISION LATHE

Demonstrates high productivity machine for machining shaft configurations

With original 1-spindle and 2-turret concept, and tailstock that is servo controlled, this machine configuration for shaft machining of various workpieces. The Z-Axis has stroke of 650mm and a Max.700mm※ long shaft machining is possible. In addition, X-Axis with a 115mm stroke, can also support crankshaft machining. Through symmetrical twin turret design, balance cutting, simultaneous left and right individual cutting are possible resulting in individual shorter cutting times of different shapes. The adoption of more rigid 10-station turret, more tooling is available. The vertical X, Z axis slides use a rigid square box-way slide, and in combination with large spindle: φ120mm bearing bore(B specification) the heavy machining on the cutting area of 2.0mm2 is made easy. ※When OD holder is used in aφ100 spindle, up and down individual cutting is possible. 

Space Saving

To accommodate a long shaft machining and heavy crankshafts, the machine is equipped with spindle with capability of up to 10-inch chuck, 2 symmetrical turrets that can cut up to 700mm workpiece in length, and configured with MT-5 (B specification) tailstock. Still, the machine has only a machine width of 1,960mm, and floor area of 3.4m2. As compared with previous shaft cutting machines, this machine has approximately 25% less floor area while increasing manufacturing frequency by cutting with 2 turrets. 

Emphasis on Workability

The distance from the front center of the machine to the center of the spindle is 370mm, and the distance until the turret holder mounting face is 190mm. This is a good structured design. Therefore, tool changing is reasonably easy to perform. This square design is also focused on maintenance and also achieves a high safety.  

 

Especificaciones destacadas
Velocidad del husillo estándar rpm Max 3.500
Diámetro interior del husillo (ID) mm 100
Desplazamiento rápido (X / Z) m/min 16 / 30
Motor (VAC) kw AC15/11
Recorrido de los ejes (X / Y / Z) mm 115 / Y / 650

 

Para obtener más información

 

MAQCENTER | Delegaciones
Barcelona
Polígono Industrial Rubí Sur
Avda. Antoni Gaudí, 142
08191 Rubí
Google Maps

Tel. +34 93 697 27 26
Fax +34 93 697 29 30
Barcelona
Valencia
Polígono Industrial L'Andana
Edificio ABM II, Planta 1ª Puerta 3
46980 Paterna
Google Maps

Tel. +34 93 697 27 26
Fax +34 93 697 29 30
Valencia
Madrid
Polígono Industrial "La Estación"
C/ Milanos, 10-Nave 54
28320 Madrid
Google Maps

Tel. +34 91 692 26 08
Fax +34 91 692 70 74
Madrid
Vitoria
Parque Empresarial INBISA
Av. de los Olmos, 1, Ed. C - Pab. 9
01013 Gasteiz, Álava
Google Maps

Tel. +34 945 12 33 60
Fax +34 945 28 47 56
Vitoria
Porto
Rua do Grés, 118
4445-266 Alfena, Valongo
Google Maps

Tel. +351 229 690 681
Fax +351 229 680 281
Porto
Usamos cookies propias y de terceros, para analizar sus hábitos de navegación. Si continua navegando consideramos que acepta el uso de cookies. OK Más info