MAQcenter

Segunda-feira, 10 de Fevereiro de 2014

New Okuma Plant Relies on Automation, Production Control

New Okuma Plant Relies on Automation, Production Control
OKUMA DS1

The company says the DS1 facility in Japan is capable of 2 times the production capacity and 1/2 the lead time of the previous site.

With its newest manufacturing facility in Oguchi, Japan, machine tool builder OKUMA literally has made a clean break from its previous approaches to production. The manufacturing facility that previously stood on the site of this plant was leveled in 2012. On May 20, 2013, the company completed construction of the replacement plant, DS1, a 254,000-square-foot facility for the production of CNC lathes and multitasking machines. The first of an expected series of so-called “Dream Site” facilities, the DS1 plant is capable of 2 times the production and 1/2 the lead time of the facility it replaced. Staffing, meanwhile, is roughly the same.

The company says that increasing manufacturing capacity in Japan was necessary to its aim of increasing sales volume outside of Japan. While serving various machining needs in various industries and international markets has led to an expanded product line, competing effectively in those markets requires the company to achieve not just competitive pricing but also competitive delivery. The result is a challenge that many of OKUMA's customers would immediately recognize: the need to manufacture responsively and cost-effectively in an environment of high product variety and low production volumes. The now-operational DS1 facility is the company’s answer to this challenge.

The facility was open to the public in November as part of the company’s OKUMA Machine Fair 2013 open house, and I had the chance at this event to talk about the facility with company president and CEO Yoshimaro (Dean) Hanaki. For OKUMA, overcoming the high-mix/low-volume challenge entailed all of these elements:

Automation. The principal way the plant expanded capacity was not by adding space or people, but by taking advantage of time that formerly went unused. In the past, says Mr. Hanaki, production would stop during the night and on weekends. In the new plant, automation is used extensively to enable machines to keep producing when staffing is slight.

That automation consists of robot loading of machine tools in some cases. However, the most visible and extensive type of automation in the shop is the flexible manufacturing system. Various lines in the facility consist of multiple OKUMA machining centers united by a Fastems pallet loading system, which in turn draws work from a multi-story rack of pallets accommodating the setups for numerous part numbers. By swapping pallets in and out of the machines as frequently as needed, this configuration enables the machining centers to keep running efficiently even though batch sizes are small and the variety of machined parts is large.

Consolidation. Following an approach that is practically the opposite of outsourcing, the DS1 plant seeks cost efficiency by combining nearly all of the steps in machine tool production under one roof. Raw material input, machining, kitting, subassembly, final assembly, inspection and shipping all occur within the facility.

Production control. While the company was building this new plant, it was also building the information system essential to making it work. A production control system coordinates orders and manufacturing capacity in order to schedule part numbers productively on the FMS lines, and also to ensure that parts are delivered just as they are needed to machines being assembled.

Energy savings. One other significant source of production expense is energy. The DS1 plant saves this cost by combining energy-conserving features such as LED lighting with renewable power generation through solar panels on the roof and one of the building’s walls. Compared to plant it replaced, this plant’s energy consumption is 30 percent less.

 

« voltar

MAQCENTER | Delegações
Barcelona
Polígono Industrial Rubí Sur
Avda. Antoni Gaudí, 142
08191 Rubí
Google Maps

Tel. +34 93 697 27 26
Fax +34 93 697 29 30
Barcelona
Valencia
Polígono Industrial L'Andana
Edificio ABM II, Planta 1ª Puerta 3
46980 Paterna
Google Maps

Tel. +34 93 697 27 26
Fax +34 93 697 29 30
Valencia
Madrid
Polígono Industrial "La Estación"
C/ Milanos, 10-Nave 54
28320 Madrid
Google Maps

Tel. +34 91 692 26 08
Fax +34 91 692 70 74
Madrid
Vitoria
Parque Empresarial INBISA
Av. de los Olmos, 1, Ed. C - Pab. 19
01013 Gasteiz, Álava
Google Maps

Tel. +34 945 12 33 60
Fax +34 945 28 47 56
Vitoria
Porto
Rua do Grés, 118
4445-266 Alfena, Valongo
Google Maps

Tel. +351 229 690 681
Fax +351 229 680 281
Porto
Usamos e cookies de terceiros para analisar seus hábitos de navegação. Se você continuar a navegar considerar a aceitar o uso de cookies. OK Mais info