MAQcenter
OKUMA
LU-S1600

LU-S1600
OKUMA
LU-S1600

2-saddle lathe that provides the maximum in floor space productivity

Enhanced, simultaneous 4 axis turning in a small footprint.

With 2-saddle lathe construction, simultaneous upper/lower turret turning

  • Suitable for small-diameter shaft work (automobile cam shafts, drive shafts, balance shafts, electrical-component motor shafts, etc)
  • ø32-mm boring bar for CVJ outer race ID applications also possible

Maximum turning dia: ø160 x 550 mm

Boring bar size ø32

Three features that help to achieve high accuracy and high productivity

High machining capacity

  • One-rank higher machine rigidity provides powerful turning.
  • Machining capacity (15/11 kW spindle [Opt] actual data):

Turning : 2 mm2 (S45C)
Cutting speed : 150 m/min
Infeed : 4 mm
Feed : 0.5 mm/rev

  • Upper/lower turret simultaneous turning fully supported by highly rigid bed and slide guideways
  • ID simultaneous turning also possible with highly rigid V6 turrets
  • One-size larger center (MT 5) used with highly rigid tailstock

Wide range of applicable workpieces

  • From ø60-mm standard shafts
  • To max ø160-mm flanges
  • Powerful boring at max ø32 mm

Thermo-Friendly Concept

  • Superb dimensional-accuracy stability is maintained during ambient temperature changes and machine stops, to provide much less compensation work and large improvements in productivity.

 

Especificações destacadas
Diâmetro máximo de torneamento mm 160
Velocidade standard da árvore rpm 4.000
Potência standard da árvore kw 11 [15]
Diâmetro interior da árvore (ID) mm 62
Torreta Superior - Nº de Ferramentas 6
Torreta Inferior - Nº de Ferramentas 6
Avanço rápido (X / Z) m/min X:20 / Z:30
Distância entre pontos mm 550 / 1000

 

Para obter mais informação

 

MAQCENTER | Delegações
Barcelona
Polígono Industrial Rubí Sur
Avda. Antoni Gaudí, 142
08191 Rubí
Google Maps

Tel. +34 93 697 27 26
Fax +34 93 697 29 30
Barcelona
Valencia
Polígono Industrial L'Andana
Edificio ABM II, Planta 1ª Puerta 3
46980 Paterna
Google Maps

Tel. +34 93 697 27 26
Fax +34 93 697 29 30
Valencia
Madrid
Polígono Industrial "La Estación"
C/ Milanos, 10-Nave 54
28320 Madrid
Google Maps

Tel. +34 91 692 26 08
Fax +34 91 692 70 74
Madrid
Vitoria
Parque Empresarial INBISA
Av. de los Olmos, 1, Ed. C - Pab. 9
01013 Gasteiz, Álava
Google Maps

Tel. +34 945 12 33 60
Fax +34 945 28 47 56
Vitoria
Porto
Rua do Grés, 118
4445-266 Alfena, Valongo
Google Maps

Tel. +351 229 690 681
Fax +351 229 680 281
Porto
Usamos e cookies de terceiros para analisar seus hábitos de navegação. Se você continuar a navegar considerar a aceitar o uso de cookies. OK Mais info